home *** CD-ROM | disk | FTP | other *** search
/ SGI Developer Toolbox 6.1 / SGI Developer Toolbox 6.1 - Disc 4.iso / public / fax / src / etc / config.ppi-pm14400fxsa < prev    next >
Text File  |  1994-08-01  |  2KB  |  38 lines
  1. # $Header: /usr/people/sam/fax/etc/RCS/config.ppi-pm14400fxsa,v 1.6 1993/09/27 11:12:00 sam Rel $
  2. #
  3. # Config file for a Practical Peripherals PM14400FXSA
  4. # Class 2 modem w/ firmware revision 2.17 or newer.
  5. #
  6. # CONFIG: CLASS2: *PM14400FXSA*
  7. #
  8. CountryCode:        1        # USA
  9. LongDistancePrefix:    1
  10. InternationalPrefix:    011
  11. AreaCode:        415
  12. DialStringRules:    etc/dialrules
  13. FAXNumber:        +1.415.965.7824
  14. ServerTracing:        1        # log server-related operations
  15. SessionTracing:        11        # log server-related operations
  16. RecvFileMode:        0600        # recvd facsimile are not public
  17. LogFileMode:        0600        # private log files
  18. DeviceMode:        0600        # device is accessible only to uucp/fax
  19. #QualifyTSI:        etc/tsi        # accept facsimile from anyone
  20. SpeakerVolume:        off        # machine's are already too loud
  21. RingsBeforeAnswer:    1        # answer on first ring
  22. #
  23. ModemType:        Class2        # use this to supply a hint
  24. ModemRate:        19200        # rate for DCE-DTE communication
  25. ModemFlowControl:    rtscts        # hardware flow control assumed
  26. ModemFlowControlCmd:    &K3        # set desired flow control method
  27. ModemSetupDTRCmd:    &D3        # setup so DTR drop resets modem
  28. ModemSetupDCDCmd:    &C1        # setup so DCD reflects carrier (or not)
  29. #GettyArgs:        "std.%s -"    # locked at receive rata (for SunOS)
  30. #GettyArgs:        "-h %l dx_%s"    # requires modem to auto-detect fax/data
  31. #
  32. ModemDialCmd:        DT%s@        # T for tone dialing, @ for silence
  33. #
  34. ModemSendFillOrder:    LSB2MSB        # as expected
  35. ModemRecvFillOrder:    MSB2LSB        # opposite of what makes sense
  36. #
  37. Class2RecvDataTrigger:    "\022"        # character sent to modem to start recv
  38.